2016 New 12V-24V 24A RF RGB LED Sync Controller

Model: MJJC-RFBT002-RGB

RF BT remote controller-RGB

MJJC-RFBT002-RGB, adopts the most advanced PWM (Pulse Width Modulation) digital control technology, it is used for controlling constant voltage LED RGB lamps. For instance, point source of light, flexible light strip, led modules, led strings and so on; It belongs to low-voltage DC power input and output with four interfaces, including + V is extremely common interfaces, the other three for the RGB control interface. Meanwhile, you could adjust brightness, static color choices and various dynamic changes in lighting effects through RF 14keys remote control. In addition, It is convenient to use RJ45 connector to connect the multiple controllers together, and achieve the synchronization function of thousands meters led strips. In theory, they can be connected numerous.

Product Features:

• Designed for RGB constant voltage LED lights, Working voltage DC12-24V.
• Three channels output, Max. load current: 3CH*8A; Max. load power: 288W/12V; 576W/24V.
• Adopts RF 14keys remote control with fashion appearance, no need line-of-sight. Control range up to 20 meters.
• Memory function, each time power-on reserve the mode which stop in the last power-down.
• 18 modes in total, including 8 static colors and 10 dynamic changes.
• The brightness of static color is adjustable, 256 levels in total; the speed of dynamic changes is adjustable, 100 levels in total.
• Long-press the brightness and speed key can get the fast adjustment, convenient for operation.
• Multiple controllers can work synchronically when connected by network cable through the RJ45 connector, the network cable between 2 ports up to 80 meters.
• Warranty of this product is one year, exclude the artificial situation of damaged or overload working.

Technical Parameters:

Controller

Remote control

RGB LED Sync Controller 12V 24V DC 24A

RGB Connection：V+→COM、CH1→R、CH2→G、CH3→B；

Direction for use

• Connect the load wire at first, followed by the power wire; Please ensure short circuit can not occur between wires before turning on the power；
• Adopts RF remote technology, 14 buttons in total;
• The signal light flash– represents the signal has been received well;

The function of buttons are shown as below:

Standard color changes as follows:

Tips: Receiver can be controlled by any one the same remote as factory default; RFBT remote control delivered with unique RF code as factory default; if unique-control is needed, please matching the code before installation and using.

IF any synchronous lighting projects need,please kindly see the following wiring diagram,It must be helpful to you.

Each Sub-control can drive Max 20M 5050 60leds/m RGB LED Strip Lights,and with RJ45 synchronous port so that you can give up the RGB Amplifier.